横观各向同性土介质与结构物共同作用的有限元与边界元耦合分析

本文采用有限元与边界元耦合方法对上与结构物进行共同作用的分析．其中上部结构采用有限元子结构法，地基上考虑为横观各向同性特性，应用边界元法，通过基础界面上位移连续、面力平衡的条件进行耦合分析．编制了相应的计算程序，对某高层空间剪力培与地基的共同作用进行了计算，与有限元法和实测结果进行了对比分析，得到了满意的结果．说明：有限元和边界元的耦合方法能充分发挥两者的优越性，不失为共同作用分析的一种有效途径．     

N_2/Fe(100)相互作用的动力学研究

用准经典轨迹法对N2－Fe（100）系统进行了研究，分析了氮分子在Fe（100）面上的直接散射和离解性吸附等过程中的能量传递和重新分配，阐明了表面催化的机理。作为准经典轨迹法更为深入的应用，研究了主要LEPS势参数和势特性对初始离解吸附几率（S0）的影响，得出了S0随势特性变化的规律。     

Spectral approximations of the Stokes problem by divergence-free functions

The method of Moser, Moin, and Leonard (1983) for the approximation of the three-dimensional Navier-Stokes equations using divergence-free subspaces is revisited and analyzed. It is shown that the computed velocity field converges to the physical one with spectral accuracy. Moreover, a method for recovering the pressure field is proposed. This method is stable and provides a pressure that converges to the physical one with spectral accuracy.     

RCC斜层平推铺筑法施工质量评估

RCC混凝土斜层平推铺筑法是一项新的施工工艺,本文通过芯样测试法对该工艺进行了全面细致的质量评估。     

交流量热法测量SiO2薄膜的热扩散率

介绍了交流量热法测量薄膜热扩散率的原理和系统组建，用脉宽为纳秒级的超短激光脉冲作为热源，测量了Si衬底上厚度为100nm和500nm的SiO2薄膜水平方向上的热扩散率，实验结果表明该结构的热扩散率比SiO2体材料的要小，并且随着SiO2层厚度的减小，热扩散率也减少。     

三峡水电站“充水保压”钢蜗壳外围混凝土结构三维有限元分析

本文介绍三峡水电站蜗壳结构三维有限元计算结果，结果表明：三峡水电站钢蜗壳选用充水保压浇筑外围混凝土的埋置方式是合适的；采用78～88m保压水头值比较合适；蜗壳结构各截面最大拉应力值出现在不同荷载组合情况下，在配置钢筋时应引起重视。     

Excavation of Inlet Tunnels at Geheyan Power Station

1　ＯｖｅｒｖｉｅｗＴｈｅＧｅｈｅｙａｎＰｏｗｅｒＳｔａｔｉｏｎｈａｓｆｏｕｒｃｉｒｃｕｌａｒｉｎｌｅｔｔｕｎ ｎｅｌｓ，ｏｎｔｈｅｒｉｇｈｔｂａｎｋｏｆｄａｍｓｉｔｅ，ｗｉｔｈｔｈｅｉｒｅｘｃａｖａｔｉｏｎｄｉ ａｍｅｔｅｒｏｆ 11．3ｍｔｏ 12．5ｍ，ａｆｔｅｒ ｌｉｎｉｎｇｄｉａｍｅｔｅｒｏｆ 9．5ｍ，ａｘｉｓ ｔｏ ａｘｉｓｓｐａｃｉｎｇｏｆ2 4ｍ．Ｔｈｅｔｈｉｃｋｎｅｓｓｏｆｐｉｌｌａｒｓａｒｅｅｑｕａｌｔｏｔｈｅｔｕｎｎｅｌｄｉａｍｅｔｅｒ．Ｔｈｅｉｎｔａｋｅｃｅｎｔｅｒｉｓａｔｅｌｅｖａ ｔｉ…     

掺矿渣微粉和粉煤灰的水泥胶砂性能试验研究

 根据正交设计法,利用L24(61×41×23)正交表安排试验,探讨了混合材掺 量、矿渣微粉与粉煤灰的比例、矿渣微粉细度、粉煤灰品种对水泥胶砂流动度、7,28,90 d 龄期的抗压强度的影响,初步确定水泥熟料、矿渣微粉、粉煤灰三元体系的较优组合。结果 表明,粉煤灰与矿渣微粉双掺比单掺矿渣微粉或单掺粉煤灰的水泥胶砂,具有一定的优势。     

A new method of preform design in hot forging by using electric field theory

The preform design in metal forging plays a key role in improving product quality, such as ensuring defect-free property and proper metal flow. In industry, preforms are generally designed by the iterative trial-and-error approach. This approach, however, leads not only to the increase of significant tool cost but also to the extended down-time of the production equipment. It is thus necessary to reduce time and man power through an effective method of preform design. In this paper, the equi-potential lines designed in the electric field are introduced to find an appropriate preform shape. The equi-potential lines generated between two conductors of different voltages show similar trends for the minimum work paths between the undeformed shape and the deformed shape. Based on this similarity, the equi-potential lines obtained by the arrangement of the initial and final shapes are utilized for the design of the preform, and then the artificial neural network is used to find the range of initial volume and potential value of the electric field.     

多频电磁波测井数据的反演成像技术及应用

针对测井数据反演成像问题的不适应定性，采用了带不等式约束的正则化最小二乘迭代反演，模型响应的正演计算用有限元方法实现，模型响应对电阻率及介电常数的偏导数用格林函数和互换原理计算，对高低频电磁波测井数据的反演分两步进行，首先用低频数据得到电阻率的大致分布，再以此为初值，用高频电磁波数据同时反演电阻率和介电常数，通过对模型的数值模拟和某地热田1口井的实际资料的应用表明，电磁波测井数据的反演厉像能给出井周近旁介质的电性参数分布，而在离井较远的区域不能得到稳定可靠的解释结果，无论高频还是低频测井数据，要得到高质量的成像结果，工作频率的适当选择及接收器灵敏度的提高是至关重要的。